







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Fullerton, CA: What You’re Actually Getting
Paver driveways in Fullerton, CA typically run $7,000 – $18,000 for a standard two-car driveway, and most jobs take 3 – 5 working days from demo to first drive-on. That number covers excavation, base, compactor work, pavers, edge restraint and polymeric sand. Driveways cost more than concrete because there’s more material, more labor and a base that has to be built correctly or the pavers move within a year. Call (833) 522-5059 to get a written line-item estimate for your driveway.
How a Paver Driveway Goes In, Stage by Stage

Here’s the actual sequence. If a contractor skips a step on this list, ask why.
Day 1: Demo and Excavation
We cut and remove the existing surface, then excavate down 8 – 12 inches depending on paver thickness and whether the driveway sees regular truck traffic. On an older Fullerton ranch home, that means hauling off asphalt or failing concrete and exposing whatever’s underneath. You’ll decide the paver profile and layout before this day, because once the base is in, changing your mind means tearing it back out.
Day 1 – 2: Subgrade and Base
We compact the subgrade, then lay 4 – 6 inches of Class II base rock in lifts and compact each lift with a plate compactor. This is the part nobody sees and the part that fails first when it’s done wrong. We check slope here so water sheets off the driveway rather than pooling against your garage slab or the neighbor’s fence line.
Day 2 – 3: Setting Bed, Pavers and Cuts
A 1-inch sand setting bed goes down, then pavers go in from a reference line. Edge cuts along the driveway apron and garage opening get made with a wet saw. You’ll choose the paver pattern (running bond, herringbone, basketweave) early, and choose whether you want a contrasting border or soldier course at this stage.
Day 3 – 4: Edge Restraint and Polymeric Sand
We install edge restraint or a concrete curb on the open sides, then sweep polymeric sand into the joints and activate it with water. Polymeric sand locks the pavers together and blocks weeds and ants. You’ll want to keep traffic off the driveway for about 24 hours after this step.
Day 5: Cleanup and Walkthrough
We clean up, haul off remaining material and walk the job with you. That walkthrough covers the 730-Day Done Right Promise: if anything settles, shifts or cracks within that period, we come back and make it right. No fine print.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Pavers and Specs You’ll Choose Between
Paver selection moves the price more than any other single decision. Here’s what you’ll weigh:
- Concrete pavers: The workhorse. $3 – $7 per square foot for the material, holds color well, comes in dozens of shapes and colors, and lasts through Fullerton’s hot summers and winter rains without fading much. Suits most driveways.
- Clay brick pavers: Warmer looking and harder wearing, but the material is often twice the cost of concrete. Makes sense on the older Craftsman and Spanish Colonial homes near downtown where the style matches the house.
- Permeable pavers: Concrete or clay with wider joints or drainage gaps, letting water percolate into the base instead of running to the street. Great for properties where drainage is tight or where you want to reduce runoff during a Santa Ana rain sweep. Costs more in base engineering.
- Paver thickness: 60mm is standard for residential driveways. Going to 80mm adds cost but handles heavier loads if you park a truck or RV regularly.
- Pattern: Running bond is the cheapest and fastest. Herringbone and basketweave cost more in labor because cuts are tighter and waste is higher.
On material brands, we work with pavers from Belgard where the right look is available, and we use Quikrete or Sakrete bagged products for small repair and edge work. You’ll see the samples before committing.
What Paver Driveways Cost in Fullerton, CA

Installation runs $7,000 – $18,000 for a typical Fullerton driveway. Here’s the line-item picture:
| Line item | Typical range |
|---|---|
| Full paver driveway installation (2-car) | $7,000 – $18,000 |
| Driveway replacement (demo + new pavers) | $5,000 – $14,000 |
| Sealing (after installation or on existing pavers) | $250 – $700 |
What pushes a job to the high end of $18,000:
- Square footage. A single-car driveway is half the job of a two-car; a long driveway with a turnaround doubles it.
- Existing condition. Failing asphalt or cracked concrete adds demo and haul-off cost. If the base underneath is bad, more excavation is needed.
- Paver grade. Premium clay brick or imported concrete pavers push the material cost up; standard concrete pavers keep it down.
- Drainage and grading. A driveway that slopes toward the house or a low spot needs corrections to the subgrade and possibly a channel drain. Fullerton’s clay-heavy soil holds water, so grading matters here.
- Edge conditions. A straight run against an existing curb is simple. A curved border or a driveway bordered by landscape planting adds cuts, labor and material waste.
A written estimate should spell out: square footage, paver type and cost, base depth, demo and haul-off, edge restraint, polymeric sand, and permits if required. What’s often left out: utility relocation if the driveway crosses a water or gas line, drainage corrections, and haul-away of old material. We itemize all of it so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat Fullerton Homes Specifically Do to This Job
Fullerton’s housing stock shapes paver driveway work in ways you won’t see in newer cities. On the post-war ranch tracts on the west and south sides, driveways were poured thin and narrow, often 8 – 10 feet wide. Widening one to fit a modern SUV means cutting back the existing slab and expanding the base, and it may mean moving a hose bib or a gas meter connection. In the hillside custom homes in Coyote Hills and the Raymond area, the real complication is grade. A driveway that pitches steeply needs a deeper base and a properly engineered edge, and water management becomes the whole conversation. Downtown and the college-area blocks have their own issue: older lots with alley-facing detached garages, where the driveway doubling as access path for a future ADU conversion means the base has to be built to a higher standard from day one.
Fullerton permitting: a driveway replacement or installation usually requires a permit through the city, and the inspection covers base compaction and drainage. Work that changes the footprint, adds a curb cut or affects the right-of-way gets a closer look. On properties near the historic downtown core, exterior work visible from the street can trigger preservation review.
Climate matters. Fullerton’s hot, dry summers and Santa Ana winds cure pavers fast, and winter rains test the base. Polymeric sand installation timing should avoid the rainy window. Our technicians have up to 12 years of experience working in Orange County soil and climate conditions.
Serving Fullerton, CA – Our Local Coverage Area
We serve Fullerton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Fullerton

Most Fullerton paver driveways take 3 – 5 working days from demo to walkthrough. A single-car driveway with a simple running bond pattern is on the short end. A two-car driveway with a curved border and herringbone pattern stretches to five days or more. Weather can extend it: we won’t lay pavers or activate polymeric sand in active rain. Call (833) 522-5059 for a timeline estimate specific to your property.
Yes, most driveway installations and replacements in Fullerton require a permit through the city, and the inspection typically covers base compaction and drainage. The permit scope depends on whether you’re replacing in kind, changing the footprint, or cutting a new curb. We pull the permits and handle the inspection scheduling as part of the job.
Not safely. We demo the existing surface and excavate a fresh base. Installing pavers directly over old concrete traps moisture, hides base failures, and creates a driveway that moves and settles within a year or two. The extra demo cost is the reason paver driveways last 25 – 30 years when done right.
Paver driveway installation in Fullerton runs $7,000 – $18,000 for a typical two-car driveway, and driveway replacement with demo runs $5,000 – $14,000. The variable that moves the price most is square footage and paver grade. Call (833) 522-5059 for an itemized quote; estimates are free.
Our work is covered by the 730-Day Done Right Promise. If the base settles, pavers shift or the edge restraint fails within 730 days of completion, we come back and fix it at no charge. That’s one of the longest workmanship guarantees in the residential construction space. The paver manufacturer’s material warranty is separate and depends on the brand you choose.
Get a Free Paver Driveway Estimate in Fullerton
If your Fullerton driveway is cracked, narrow, sloping toward the house or just overdue for a face-lift, the first step is a free on-site estimate. We’ll measure, check the base and grading, and give you a written itemized quote with the $7,000 – $18,000 number matched to your actual property. Call (833) 522-5059. A live person answers, 24/7. Estimates are free, and 0% financing for 18 months is available if you want to spread the cost.
Written by the team at Groundwork Construction Co.












