







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What a chain link fence in Midway City, CA costs and how long it takes
A galvanized chain link fence in Midway City, CA typically runs $3,500 to $9,000 installed, and most residential jobs are finished in three to five working days from the day we set the first post. The number moves with linear footage, height, gate count and how many old posts have to come out of the ground. Call (833) 522-5059 for a free on-site estimate with line-item pricing in writing, so you can see what each run and each gate actually costs before anything gets ordered.
The five stages, from first stake to final tension

Chain link goes in fast, but only if the sequence is right. Here’s how we run it on a Midway City job.
1. Mark, call for locates, and confirm the line (day 1)
We walk the property with you, confirm where the fence sits relative to the property line, and call 811 for utility locates before a shovel touches the ground. On the old unincorporated parcels around 92655, lines can run closer to the edge than anyone expects, so this isn’t a formality. You decide the exact run and gate placement at this stage, because moving a gate after concrete is a different job.
2. Demo and prep (day 1 – 2)
Old posts, panels and concrete footings come out, and we haul the debris. Sometimes a customer only wants half a fence replaced, and we tie the new run into the old one where the existing post and concrete are sound. Prep is where a lot of quotes quietly get vague; ours lists the removal allowance so you know what disposal is included.
3. Set posts and pour footings (day 2 – 3)
Terminal posts, corner posts and gate posts go in with concrete footings set to depth. Line posts follow at even spacing. This is the stage that determines whether the fence stands straight for the next twenty years. Depending on footing cure, we may come back the next day to hang everything.
4. Rails, mesh and tension (day 3 – 4)
Top rail, tension bands, and the mesh get pulled and stretched. A chain link fence that’s strung loose will look tired in a year; the tension has to be tight and even. You’ll walk the line with us here, and any adjustment is made the same visit.
5. Gates, hardware, cleanup (day 4 – 5)
Gate frames, hinges, latches and any operators get set and tested, and the site gets cleared. You get a final walkthrough and the 730-Day Done Right Promise in writing: if anything we installed isn’t right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that change what you pay and how it holds up
- Gauge and coating: Standard residential is 11.5-gauge galvanized, which is fine for a typical yard. Heavier 9-gauge mesh and vinyl-slathered or vinyl-coated finishes cost more but resist knocks and look softer against a small yard. We’re glad to quote both side by side.
- Height: Four-foot is the budget standard; five-foot and six-foot are what most homeowners pick for privacy screening kits or dog containment.
- Posts and footing depth: Thicker posts and deeper footings cost a little more up front and keep the fence plumb through years of wind.
- Gates: Single walk gates, double drive gates and cantilever sliding gates are each different hardware. You choose the width and swing direction early, since gate posts get set first.
- Privacy slats and screening: Fill slats or a screen strip over the chain link add cost but give you a bit of visual barrier without switching to another fence type.
If you want a different aesthetic entirely, that’s a different conversation, and our fence installation service covers it. If the project grows into a bigger yard improvement, homeowners often pair this with ADU Site Prep & Utilities in Midway City, since both start with digging and layout around aging structures.
What Chain Link Fence costs in Midway City, CA

Plan on $3,500 to $9,000 for a residential chain link fence here. That range reflects what actually moves the number:
- Linear footage: The biggest driver. A small side-yard run sits near the bottom; wrapping a full lot with a front run moves toward the top.
- Existing fence and concrete: Tearing out old posts and footings adds labor and disposal.
- Height and gauge: Jumping to six-foot with heavier mesh and thicker posts is the second-largest swing.
- Gates: Each gate adds hardware and a heavier post to carry it. Double drive gates cost more than a single walk gate.
- Site access and terrain: Tight lots and uneven ground make setting posts slower.
A written estimate from us lists the run length, post spacing, gauge, gate hardware, demo and disposal, and the permit line. If you want a full package with gates that match your front wall or entry, this is part of a larger scope under Fence Installation in Midway City. Small door and entry upgrades sometimes get added to the same project, which is why homeowners often pair this with Door Installation in Midway City.
See the difference
Before
After
Before
After
Before
AfterWhat Midway City homes specifically do to this job
Midway City is one of Orange County’s last unincorporated islands, so construction here runs on county building permits through OC Public Works rather than a city hall counter. That matters for fences: contractors who only know city processes routinely misjudge timelines, and it’s worth understanding before you set a start date. The 92655 blocks are dominated by small post-WWII single-story tract houses from the 1950s and 1960s, mixed with manufactured homes, and lot lines on these old unincorporated parcels are famously tight and irregular. If a run sits with fence, building and clearance limits close together, we check it before ordering material. The inland-coastal climate helps here: mild, dry summers and winter rain mean fence work rarely gets rained out. We cover the whole area on our Midway City service page.
Serving Midway City, CA – Our Local Coverage Area
We serve Midway City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Chain Link Fence in Midway City

Most residential chain link jobs take three to five working days, with longer lots stretching to a week. The footing cure between setting posts and hanging mesh is what sets the pace. Call (833) 522-5059 and we’ll give a realistic duration for your lot.
Many residential fences here require a county permit through OC Public Works, and we confirm the requirement for your specific property during the estimate. Because Midway City isn’t a city-run jurisdiction, the process works differently than in neighboring Westminster or Garden Grove, and we build that into the schedule rather than discovering it mid-job. Call us for the permit line on your quote.
We call 811 for utility locates before digging, and we set posts to minimize root damage. We flag anything underground before a shovel goes in. Call (833) 522-5059 to walk your yard with us first.
Most homeowners here spend between $3,500 and $9,000, depending on footage, height and gate count. We write a line-item estimate so the number you see is the number you pay. Call (833) 522-5059 for a free on-site estimate – estimates are free.
Every fence we install is covered by the 730-Day Done Right Promise: if the workmanship isn’t right, we make it right. Posts and mesh from our material partners carry their manufacturer warranties on top. Call (833) 522-5059 with any warranty question.
Get a free on-site estimate for your chain link fence
Call (833) 522-5059 to schedule a free on-site estimate in Midway City. We’ll measure the run, look at utility locates and lot lines, and leave you with a written, line-item quote at the number you’ll pay. Calls are answered by a live person around the clock, and our technicians have up to 12 years of experience.
Written by the team at Groundwork Construction Co.












