







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Brea, CA: What the Job Actually Involves
Cabinets & countertops in Brea typically run $14,000 – $45,000 for a full tear-out and replacement, and most jobs take two to four weeks from demo to final countertop template. The work splits into two phases that have to be sequenced correctly: cabinet boxes and frames go in first, then the countertop gets templated and fabricated to fit what’s actually there. Call (833) 522-5059 for a free estimate on your Brea kitchen.
How We Sequence a Cabinet and Countertop Job

The order matters more than people expect. Here’s the real sequence we run, stage by stage.
Stage 1: Measure, design, and ordering (week one)
We measure the room, check for out-of-square walls, and confirm what’s under the floor and behind the drywall. You’ll pick cabinet style, door material, and countertop slab during this window. Cabinet lead times are the long pole here, so this is where the schedule really starts. Stock boxes can arrive in days; semi-custom KraftMaid runs several weeks depending on door style and finish.
Stage 2: Demo and protection (one to two days)
Old cabinets come out, appliances get disconnected, and we protect the floors and adjacent rooms. In older Brea homes this is where we find surprises – water damage behind a sink cabinet, or a wall that isn’t plumb. You’ll get a call before anything gets framed or patched, with a written change order if it’s outside the original scope.
Stage 3: Rough-in and prep (two to four days)
If electrical or plumbing is moving, this is when it happens, and it’s also when the inspection gets scheduled if the scope requires one. Walls get patched and leveled. We don’t set boxes on a crooked wall and hope the countertop hides it.
Stage 4: Cabinet install (two to three days)
Base and wall boxes get set, leveled, and shimmed. Doors and drawers go on last so they don’t get dinged. You’ll want to be available on the last day to review alignment and any hardware choices – soft-close hinges versus standard is a small line item with a big daily-use payoff.
Stage 5: Template, fabricate, install countertops (one to two weeks)
The countertop gets templated after cabinets are set, fabricated off-site, then installed. Under-mount sinks get cut in at this stage. Final plumbing hookup and any backsplash follows. You’re looking at roughly one week of gap between template and install for most stone, longer for specialty edges or unusual slabs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
These are the decisions that drive both the look and the price of your cabinetry and counters.
- Cabinet boxes: plywood boxes hold up better in a kitchen that sees real moisture than particleboard. It’s a modest upcharge and usually worth it.
- Door style and material: painted MDF and thermofoil are the budget end; solid wood and rift-cut veneer cost more but take refinishing down the road. KraftMaid covers most of this range in one order.
- Drawers vs. doors: drawers cost more per unit but convert dead lower-cabinet space into usable storage. Most of our Brea customers switch at least a few base cabinets over.
- Countertop material: quartz resists staining and doesn’t need sealing; granite is a natural stone with more variation and a sealing schedule; laminate is the cheapest and shows wear first. Cambria is a common quartz pick.
- Edge profile: a simple eased edge keeps cost down; a thick mitered edge adds fabrication labor and visual weight.
- Sink configuration: an under-mount sink with a solid surface countertop means the cutout is done at fabrication. Drop-in sinks are simpler to swap later.
Schluter trim and a properly sealed undermount are the small details that keep water out of the cabinet box over time.
What Cabinets & Countertops Costs in Brea, CA

Plan on $14,000 – $45,000 for a full kitchen’s worth of new cabinets and countertops in Brea. Here’s how the line items break out:
| Item | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
| Backsplash installation | $800 – $2,500 |
What pushes a job to the high end: a large footprint, relocating plumbing or electrical, structural changes like removing a wall, premium slab material, and non-standard cabinet sizes that require custom fabrication. A galley kitchen with boxes staying in place can land near the bottom; a full reconfiguration in a larger Blackstone or La Floresta home runs higher.
What’s in a written estimate: demo, disposal, cabinet material and install, countertop fabrication and install, and standard hardware. What typically isn’t: unforeseen water damage, electrical upgrades to bring circuits to code, appliance relocation, and permit fees if the scope triggers one. We list those as line items up front so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhy Brea Homes Change This Job
Brea’s housing stock splits in two, and each side creates different problems for a cabinet and countertop project. The original tract homes in the 92821 flats date from the 1950s – 70s with slab foundations and original galvanized or cast iron plumbing. Pull a base cabinet out of one of those and you may find corroded supply lines that need attention before anything new goes back in. In the hillside developments like Blackstone and La Floresta, the build quality is newer but the layouts are tighter and engineered – post-tension slabs mean you don’t core or anchor into the floor without knowing where the cables run. That’s a real constraint when a design calls for an island with electrical in it.
Permitting in Brea is straightforward for like-for-like cabinet swaps. Move a gas line, add a circuit, or take out a wall and the scope changes – that’s when a permit and inspection come into play. If cabinet work is part of a Kitchen Remodeling in Brea that touches structure or layout, we pull the permits and get the inspections passed before we close up walls. Homeowners in Brea also commonly pair a cabinet refresh with a Garage Conversion ADU in Brea or a New Detached ADU in Brea, since both jobs share the same crew and material sourcing.
Serving Brea, CA – Our Local Coverage Area
We serve Brea and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Brea

Most projects run two to four weeks end to end, with cabinet lead time as the biggest variable. Stock cabinets can compress the schedule to under two weeks; semi-custom finishes push it past four. Call (833) 522-5059 for a timeline specific to your kitchen.
Like-for-like replacement usually doesn’t require one, but moving plumbing, electrical, or gas does. We confirm the permit scope before work starts and pull what’s needed. Call us to talk through your specific plan.
Yes – many Brea cabinet and countertop projects keep the existing footprint and plumbing in place. That keeps cost and disruption down. It does limit layout changes, so it’s worth discussing what you’re after before ordering.
Countertop installation alone runs $2,000 – $6,500 depending on material and linear footage. Backsplash adds $800 – $2,500. Call for an exact quote on a counter-only scope.
Every project is covered by our 730-Day Done Right Promise: if it isn’t done right, we make it right. Cabinet manufacturer warranties run separately and depend on the line you choose. Call (833) 522-5059 to walk through the details.
Get a Free On-Site Estimate for Cabinets & Countertops in Brea
We’ll come to your Brea home, measure the space, and give you a written line-item estimate covering cabinets, countertops, and any prep work. No change orders from vague scopes, and pricing stays fixed once you sign. Our technicians have up to 12 years of experience and are background-checked. Call (833) 522-5059 to schedule your free estimate.
Written by the team at Groundwork Construction Co..












