







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Stanton, CA: What to Expect
Cabinets & countertops in Stanton typically run $14,000 – $45,000 for a full tear-out and replacement, and most jobs take two to three weeks from demo to final caulk. The cabinet boxes and countertop slab are the two biggest line items, and that range holds whether you’re updating a 1960s tract kitchen off Beach Boulevard or a unit in one of Stanton’s manufactured-home parks. Call (833) 522-5059 and we’ll come out and put a written number on your actual kitchen.
How a Stanton cabinet and countertop job actually runs, stage by stage

This isn’t a “we handle everything” pitch. Here’s the real sequence we follow, and where you’ll be making decisions.
Stage 1 – Measure and field-check (day 1, about 90 minutes)
We template the room and check what the walls are actually doing. In Stanton’s older housing stock, that means checking whether the walls are plumb and square, where the shutoffs sit, and whether the existing counter is supporting anything it shouldn’t. You’ll decide countertop material and edge profile at this stage, because the slab lead time drives the whole schedule.
Stage 2 – Demo and disconnect (day 2, one to two days)
Old cabinets come out, we disconnect the sink and appliance hookups, and we haul the debris. If you’re keeping your existing floor, we protect it and cut the new cabinet line to it. If the subfloor is soft from old leaks, that turns up now, and you’ll get a number before we touch it.
Stage 3 – Cabinet set and blocking (days 3 to 5)
New uppers and bases go in, leveled and shimmed, with blocking added for any wall cabinet that doesn’t have studs where it needs them. This is also where appliance openings get confirmed, so a fridge that’s slightly wider than the old one doesn’t become a problem later. You’ll have already picked door style and finish by now.
Stage 4 – Template and countertop install (days 6 to 12, mostly waiting)
We template for the slab, and the counter goes out for fabrication. That wait is usually five to seven working days for quartz or granite. Installation is a half day in most Stanton kitchens, followed by the sink and faucet set. Laminate is faster, often two to three days.
Stage 5 – Punch list and walkthrough (final day)
Doors and drawers get adjusted, the seam on the counter gets checked, and we walk the room with you. Anything on the list gets fixed before we call the job closed. The whole thing is backed by our 730-Day Done Right Promise, which covers workmanship for two full years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The cabinet and countertop options you’ll be choosing between
- Stock vs. semi-custom boxes: stock is the fastest and cheapest, semi-custom lets you fit odd angles and full-height uppers. In a small Stanton kitchen, semi-custom often solves layout problems stock can’t.
- Quartz vs. granite: quartz is non-porous, needs no sealing, and handles Stanton’s dry summers without issue. Granite is more forgiving on cost and heat, but wants annual sealing.
- Laminate vs. stone: laminate saves real money and is fine for a rental or flip. It will show wear on seams within a decade if you cook daily.
- Full overlay vs. framed doors: full overlay gives a cleaner line and more usable space. Framed doors suit the era of a lot of Stanton housing stock.
- Plywood vs. particleboard boxes: plywood holds up better in kitchens that see moisture. Particleboard is common and fine if the price point needs to come down.
- KraftMaid cabinetry: one of the brands we regularly specify when a homeowner wants a real upgrade over stock.
What cabinets & countertops cost in Stanton, CA

Plan on $14,000 – $45,000 for a full cabinet and countertop replacement in Stanton. Smaller jobs that reuse the existing layout and go with laminate often land near the low end; a full semi-custom kitchen with quartz, an island, and a new sink and faucet pushes toward the top.
Here’s what actually moves the number:
- Kitchen size and cabinet count: a 10-foot galley run costs far less than a U-shaped kitchen with a peninsula. Each additional box adds real money.
- Condition behind the cabinets: dry-rot, old water damage, or out-of-square walls all add labor. Stanton’s aging wood-frame homes turn this up more often than newer ones.
- Moving plumbing or electrical: relocating a sink or adding a circuit for a new range means opening walls. It’s often the single biggest swing.
- Material grade: laminate vs. quartz can move the countertop portion by thousands on its own.
- Permit scope: a straight swap usually doesn’t need one; moving plumbing or structure does.
Our written estimates are line-item and include demo, haul-away, install, and the punch list. What typically isn’t included: new appliances, new flooring, and repairs to problems we find only after demo. We never change the number after the fact without your sign-off. Call (833) 522-5059 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Stanton homes specifically do to this job
Stanton is packed into about three square miles, so almost every kitchen job here is a retrofit inside a house that was built between the late 1940s and the 1970s. We work off Beach Boulevard and around Civic Center, and the pattern repeats: small galley or L-shaped kitchens with a load of mid-century cabinets, walls that are out of square, and countertops that were set decades ago. Because the city is fully built out, permits run through Stanton’s own building department rather than the county, and older permit records often aren’t complete. That matters here: if a previous owner closed in a wall or moved a sink without a permit, we need to sort it out before we touch anything. The climate also plays in. Stanton’s dry summers and intense sun crack caulk lines and dry out wood-frame joints, so we see more dry-rot repair and subfloor work on kitchen jobs than you’d expect. Pile that on and the job gets bigger than the plan. Our technicians have up to 12 years of experience with exactly this kind of retrofit, and we know what to look for before we quote.
Serving Stanton, CA – Our Local Coverage Area
We serve Stanton and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – cabinets & countertops in Stanton, CA

Most Stanton jobs run two to three weeks from demo to walkthrough. The cabinet installation itself is three to five days; most of the elapsed time is the countertop fabrication window, usually five to seven working days for quartz or granite. Laminate shortens it considerably.
A straight swap in the same location usually doesn’t require a permit. You will need one if the job moves plumbing, gas, electrical, or a structural wall. We’ll tell you at the estimate what applies to your kitchen, and the licensed local pro pulls all required permits and sees them through inspection. Call (833) 522-5059 to talk it through.
Yes, and it’s the most common way to control cost. Keeping the sink and range where they are avoids opening walls and shortens the schedule. Moving a sink or adding an outlet is doable; it just adds labor and a permit. We’ll price both versions so you can compare.
Our range for a full replacement is $14,000 – $45,000. The low end is laminate and stock cabinets; the high end is semi-custom cabinets with quartz and an island. Every quote is written line by line with no change orders, and we offer 0% financing for 18 months plus $1,000 off projects over $10,000.
Every cabinet and countertop job is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, for two full years from completed work. That covers workmanship, and our professional team stands behind it. Call (833) 522-5059 for your free estimate.
This job often sits inside a wider update – many Stanton homeowners pair a cabinet project with Kitchen Remodeling in Stanton and treat the cabinets as one part of the whole. Our complete kitchen remodeling service covers the full scope, and we also handle Garage Conversion ADU in Stanton and New Detached ADU in Stanton for homes that need more square feet. If you’re covering the wider area, our service-area page for Stanton lays it all out.
Get a free estimate for cabinets & countertops in Stanton, CA
Call (833) 522-5059 and we’ll bring the measurement tools to your kitchen. Someone answers that line 24 hours a day, seven days a week – no voicemail. Tell us roughly what you’re thinking, and we’ll schedule a free on-site estimate, walk your existing cabinets and counter, and put the scope and a written number in front of you. All our technicians are background-checked and arrive in uniform. Call today to book your free estimate.
Written by the team at Groundwork Construction Co.












